Value
• Portability allows customer to move the machine to different
• locations within the factory easily
• Separate mandrels are needed to form different size trays only when
• altering length and/or width. Altering depth dimensions normally
• requires no mandrel change.
• The hopper design provides for fast convenient refill of the blanks.
• The hoppers adjust quickly and easily for different blank sizes.
• A variety of attachments and add-ons increase versatility

System Operation
The body blank is removed from the hopper by the vacuum feed system. As the blanks are fed, hot melt adhesive is applied to their external flanges. (The pumps are activated by serrated wheels only when the blank flange is in contact with the backup roller.) The end panels are brought forward by the mandrel into contact with the main body blank. In the flange plow section, the external flanges are closed over the side members. The precision fitted components are moved as a unit into the compression section. The perfect geometry of each box is finalized by the reciprocating platen compression action. Equalized pressures are applied in this last forming act by the BF 400V, just before the finished box is formed.

Features
• Up to 35 cases per minute / 2100 boxes per hour
• Minimal floor space requirement
• Forms hundreds of case designs
• No external air requirement
• Portable
• Numerous available options

Floor Plan
See the brochure PDF file for the corresponding floor plan.

Electrical: 230V, 3 Phase 60 Hz